Geometry
Each subtopic includes About section, revision page link, 10 preview questions, and practice CTAs.
Point, Line, Line Segment, and Ray
SubtopicPoint, Line, Line Segment, and Ray under Geometry for Grade 3 ICSE.
Preview questions (no answers)
- 1.
If we draw a straight path from the floor to the ceiling, it represents a ______.
A.B.C.D. - 2.
How many points are marked on the line segment shown?
A.B.C.D. - 3.
What is the symbol used to represent a point in geometry?
A.B.C.D. - 4.
In the given rectangle, how many line segments can you count?
A.B.C.D. - 5.
Look at the figure shown below. It starts at point and goes on forever in one direction through point . What is the name of this geometric figure?
A.Line segment
B.Line
C.Ray
D.Point
- 6.
In the diagram, points , , and lie on the same line. These points are called ______ points.
A.B.C.D. - 7.
If you have two points and , how many different lines can you draw passing through both points?
A.B.C.D. - 8.
An archer shoots an arrow. The point where the arrow is released is , and it flies through the air in a straight path forever (theoretically). What geometric figure represents the path of the arrow starting from ?
A.Line
B.Segment
C.Ray starting at
D.A Point
- 9.
Look at the edges of a standard rectangular classroom door. Each vertical edge where the door meets the frame, from the top corner to the bottom corner, represents a:
A.Ray
B.Line Segment
C.Line
D.Point
- 10.
Imagine the horizon where the sea meets the sky. If we assume the earth is flat for a moment and this horizon goes on forever in both left and right directions, it is an example of a:
A.Ray
B.Line
C.Line Segment
D.Point
Download the worksheet for Geometry - Point, Line, Line Segment, and Ray to practice offline. It includes additional chapter-level practice questions.
Preview questions (no answers)
- 1.
How many slanting lines are in the letter 'X'?
A.B.C.D. - 2.
Look at the object. What type of line forms the top of the table?
A.Slanting
B.Vertical
C.Horizontal
D.Curved
- 3.
In the letter 'L', what is the type of the bottom line?
A.Vertical
B.Horizontal
C.Slanting
D.Curved
- 4.
The lines of a notebook are usually:
A.Slanting
B.Horizontal
C.Vertical
D.Curved
- 5.
Which type of line is used to draw the handle of the cup shown?
A.Slanting line
B.Horizontal line
C.Curved line
D.Vertical line
- 6.
How many horizontal lines are there in the capital letter 'E'?
A.B.C.D. - 7.
Which of these objects has only curved lines?
A.A ruler
B.A ball
C.A dice
D.A pencil
- 8.
If you draw a line from the top-left corner of a square to the bottom-right corner, what is the relationship between this new line and the top horizontal edge of the square?
A.They are parallel
B.They are perpendicular
C.They intersect at an angle
D.They are the same line
- 9.
A set of stairs has a handrail that goes up at an angle. If we ignore the steps and just look at the handrail, what kind of line is it?
A.Horizontal line
B.Vertical line
C.Oblique (slanting) line
D.Curved line
- 10.
A flag pole stands straight up from the ground towards the sky. What type of line does the pole represent in relation to the flat ground?
A.A horizontal line
B.A vertical line
C.A curved line
D.A slanting line
Download the worksheet for Geometry - Types of Lines to practice offline. It includes additional chapter-level practice questions.
2D Shapes and their Properties
Subtopic2D Shapes and their Properties under Geometry for Grade 3 ICSE.
Preview questions (no answers)
- 1.
What shape is formed by three straight lines joined end to end?
A.Square
B.Circle
C.Triangle
D.Rectangle
- 2.
A square has how many corners?
A.2
B.3
C.4
D.0
- 3.
Which of these figures is a closed shape?
A.A line segment
B.An open curve
C.A square
D.A 'V' shape
- 4.
How many sides does the polygon in the diagram have?
A.3
B.4
C.5
D.6
- 5.
Look at the given figure. Which shape is formed by the boundary of the figure shown below, and how many corners does it have?
A.Square, 4 corners
B.Rectangle, 4 corners
C.Triangle, 3 corners
D.Circle, 0 corners
- 6.
If you join two identical squares side-by-side, what single shape do you create?
A.Triangle
B.Circle
C.Rectangle
D.Pentagon
- 7.
Which shape has more corners than a triangle but fewer corners than a pentagon?
A.Circle
B.Square
C.Hexagon
D.Oval
- 8.
A 'Semi-circle' is created by cutting a full circle exactly in half. How many straight edges and how many curved edges does a single semi-circle have?
A.straight, curved
B.straight, curved
C.straight, curved
D.straight, curved
- 9.
Farmer Ben has a field shaped like a right-angled triangle. He wants to fence it. If the sides are m, m, and m, how many corners will he need to place fence posts at?
A.B.C.D. - 10.
A path is built around a circular fountain. The fountain has a radius of m, and the path is m wide everywhere. What is the shape of the outer boundary of the path?
A.Square
B.Oval
C.Circle
D.Hexagon
Download the worksheet for Geometry - 2D Shapes and their Properties to practice offline. It includes additional chapter-level practice questions.
Introduction to 3D Solids
SubtopicIntroduction to 3D Solids under Geometry for Grade 3 ICSE.
Preview questions (no answers)
- 1.
The diagram shows a die. What 3D solid is it?
A.Cuboid
B.Cylinder
C.Cube
D.Cone
- 2.
Identify the number of circular faces in the cylinder shown.
A.0
B.1
C.2
D.3
- 3.
Which of these is a property of the shape shown in the diagram?
A.It has 6 flat faces
B.It has only 1 curved surface
C.It has 3 flat faces
D.It has no surfaces
- 4.
How many straight edges does the cube shown have?
A.6
B.8
C.10
D.12
- 5.
Which of the following objects has the same number of faces as a cube?
A.A ball
B.A book
C.A party hat
D.A battery
- 6.
Identify the 3D solid that can roll but cannot slide if placed on its curved surface.
A.Cube
B.Cuboid
C.Sphere
D.Cylinder
- 7.
Compare Shape A (Cube) and Shape B (Cone). How many more faces does Shape A have than Shape B?
A.2
B.4
C.5
D.6
- 8.
Tom has a solid shape with flat circular faces and no vertices. He rolls it along the floor. What is the shape of the path traced by the flat faces on the ground if he rolls it on its curved surface?
A.Two parallel straight lines
B.Two concentric circles
C.A single square
D.A single point
- 9.
Which of these 3D solids has the same number of vertices as a cuboid but has all its edges equal in length?
A.Cone
B.Sphere
C.Cube
D.Cylinder
- 10.
A brick is a cuboid. If you look at it from the top, you see a rectangle. If you look at it from the side, you see a smaller rectangle. If the brick has all edges of the same length, what would we call it instead?
A.A Sphere
B.A Cylinder
C.A Cube
D.A Pyramid
Download the worksheet for Geometry - Introduction to 3D Solids to practice offline. It includes additional chapter-level practice questions.
Open and Closed Figures
SubtopicOpen and Closed Figures under Geometry for Grade 3 ICSE.
Preview questions (no answers)
- 1.
A figure that does not end where it started is an ____________ figure.
A.Open
B.Closed
C.Infinite
D.Circular
- 2.
Identify the closed figure among these points.
A.Figure P
B.Figure Q
C.Both
D.None
- 3.
The diagram shows a figure. Does it enclose a space?
A.Yes, it is closed
B.No, it is open
C.Yes, it is open
D.No, it is closed
- 4.
If you draw a circle, what type of figure have you created?
A.Open Figure
B.Closed Figure
C.Straight Figure
D.Wavy Figure
- 5.
A rectangle is a closed figure. How many vertices (corners) does it have?
A.B.C.D. - 6.
Which part of the figure is the 'exterior'?
A.The space inside
B.The line itself
C.The space outside
D.The corners
- 7.
Look at the diagram. If we close the figure using the shortest path between its endpoints, what kind of line will we draw?
A.Curved line
B.Vertical line
C.Horizontal line
D.Slanting line
- 8.
Identify the property shared by a triangle, a rectangle, and a circle.
A.They are all open figures
B.They are all closed figures
C.They all have 4 sides
D.They all have 3 corners
- 9.
A racetrack is built so that cars finish at the exact same spot they started. If the track does not cross itself, what is the geometric term for the shape of the track?
A.Open figure
B.Closed figure
C.Infinite line
D.Angle
- 10.
If a figure is made of four line segments and has a gap between the first and the last segment, why is it not a quadrilateral?
A.It has no angles
B.It is an open figure
C.It has too many sides
D.It is too small
Download the worksheet for Geometry - Open and Closed Figures to practice offline. It includes additional chapter-level practice questions.